How to Flash Vivo Y71 – Vivo Y71 was officially released in 2018, and the price of the Vivo Y71 is also very affordable. Because the price is very affordable, this smartphone is much in the interest of smartphone users.
Best Way to Flash Vivo Y71
Your Vivo Y71 smartphone is having problems?.
As we already know, there are two possibilities for damage to the Smartphone, namely damage to hardware or software.
Read more:
- How to Flash Oppo Mirror 3 R3001
- How to Flash Realme C2
- If you have experienced the name forgot pattern/password, boot loop, hangs, or total dead (hard brick), on the Vivo Y71 Smartphone this is not a very big problem. But a normal problem that also often occurs in other Smartphones.
In addition to resetting to factory settings, the way to restore the performance of the Vivo Y71 Smartphone to its original state is by flashing. Flashing is a process that will erase all data on your Smartphone. If the Smartphone can still turn on, you should do a data backup first before flashing.
How to Flash Vivo Y71 using QFil
QFIL stands for Qualcomm Flash Image Loader, is a small application that can assist in Flashing Stock ROM Firmware on Qualcomm Chipset Smartphones and Tablets.
How to Flash Vivo Y71 requires the help of a PC / Laptop to be able to run it, because here we will use the QFil Software.
Before you do Flashing, you first need to prepare materials for Flash first as follows:
Vivo Y71 Flash Materials
- Download QPST/QFIL Software
- Download Stock ROM Vivo Y71
- Vivo Y71 USB Driver Download
- Setting up a PC/Laptop with the Windows operating system
- Setting up the USB cable
- We recommend that the phone battery is at least 60%, aiming to avoid flashing failure due to running out of power
NOTE:
Make sure the ROM or Firmware used is in accordance with the type and type of your Smartphone.
If you have downloaded all of the above ingredients in their entirety, then you can follow the steps to Flash Vivo Y71 using the following QFil:
- Deactivate your Vivo Y71 Smartphone.
- Next Extract all the files that you downloaded earlier.
- Then Install the Vivo Vivo Y71 USB Driver on your PC/Laptop.
- Then run QPST QFil.exe by right-clicking and selecting Run as administrator.
- Then enter the Fastboot Mode Menu, by pressing volume down + volume up simultaneously.
- When you enter, release all the buttons.
- Then Connect the Vivo Y71 Smartphone to your PC/Laptop using a USB cable.
- Then click Browse and navigate to the file prog_emmc_firehose_8916.mbn in the Firmware Folder, then click open.
- Next, select rawprogram_unsparse.xml and navigate to the patch0.xml file and select Open.
- then click the Download button to start the Flashing Vivo Y71 process.
- Wait until the Vivo Y71 Flashing process is complete.
- After the Flashing Process has been completed, please unplug the USB cable then turn on your Vivo Y71 Smartphone.
- During the reboot process, it will take between 5-10 minutes. So, please just wait.
Conclusion:
Above is an article that discusses how to Flash Vivo Y71 on boot loop, hangs, completely dead (hard brick), and slow using QFil, hopefully, this article can help you.
