How to Flash Samsung Galaxy M30 SM-M305F – The Samsung Galaxy M30 SM-M305F was officially released in 2019, this smartphone comes with qualified specifications.
Best Way to Flash Samsung Galaxy M30 SM-M305F
The Samsung Galaxy M30 SM-M305F smartphone is worth having because the price is cheap. Because the price is very affordable, this smartphone is in great demand among Android Smartphone users.
Read more:
- How to Flash Samsung Galaxy J8 SM-J810Y
- How to Flash Samsung Galaxy J6 SM-J600G
- How to Flash Samsung Galaxy Young GT-S5360
Your Samsung Galaxy M30 SM-M305F smartphone is having problems?
Problems such as boot loop hang total death (hard brick) on the Samsung Galaxy M30 SM-M305F Smartphone, and other problems such as slowness when in use. Of course, you can’t use a Smartphone for your various needs.
This is not a very big problem, but a normal problem that also often occurs in other Smartphones. As we know, there are two possibilities for damage to the Smartphone, namely damage to hardware or software.
In addition to resetting to factory settings, the way to restore the performance of the Samsung Galaxy M30 SM-M305F Smartphone as before is by flashing.
Flashing is a process that will erase all data on your Smartphone. If the Smartphone can still turn on, you should do a data backup first before flashing.
How to Flash Samsung Galaxy M30 SM-M305F using Odin
How to Flash the Samsung Galaxy M30 SM-M305F requires the help of a PC/Laptop to be able to run it, because here we use Odin Software.
Before you do Flashing, you first need to prepare materials for Flash first as follows:
Samsung Galaxy M30 SM-M305F Flash Material
- Download Firmware Samsung M30 SM-M305F
- Download Samsung USB Drivers
- Download the ODIN3_v3.13.1 software
- We recommend that the phone battery is at least 60%, aiming to avoid flashing failure due to running out of power
- Setting up a PC/Laptop with the Windows operating system
- Setting Up the USB Cable
NOTE:
Make sure the ROM or Firmware used is in accordance with the type and type of your Smartphone.
If you have downloaded all of the above ingredients in their entirety, then you can follow these steps to Flash the Samsung Galaxy M30 SM-M305F:
- Deactivate your Samsung Galaxy M30 SM-M305F Smartphone.
- Then, please Extract the Odin File and Firmware File that was downloaded earlier.
- Next, Install the Samsung USB Driver on your PC/Laptop.
- Run the Odin program by right-clicking > Run as administrator.
- Then enter Downloading Mode by pressing the Power button + Volume down + Volume up simultaneously.
- When in the “Warning” Menu, then continue by pressing the Volume Up button.
- After entering into Downloading Mode then you can then release all the buttons earlier.
- Next, connect your Samsung Galaxy M30 SM-M305F Smartphone to your PC/Laptop using a USB cable.
- Make sure your Smartphone is connected to Odin, Make sure there is also an “Added” notification.
- Please look for the Firmware File that you downloaded earlier, then enter it in the Odin Software.
- The Firmware file that you download will be in the form of a zip / rar, first, extract the file, then there will be a file with the MD5 extension.
- Then go back to the Odin Software and make sure Auto Reboot and F. Reset Time are ticked on the Flash option.
- Then enter the downloaded firmware by clicking AP, then look for the Tar.MD5 file with the extension earlier. Then click Start, then the process of Flashing your Smartphone will take place.
- Wait until the Flashing process is complete, there will be a “PASS” notification in the Odin program.
- When Flashing is successful, please remove the USB cable and turn on your Samsung Galaxy M30 SM-M305F Smartphone.
- During the reboot process, it will take between 5-10 minutes. So, please just wait.
Conclusion:
Above is an article that discusses how to Flash a Samsung Galaxy M30 SM-M305F about boot loop, hangs, and completely dead (hard brick) using Odin, easy and simple to use, hopefully, this article can help you.