How to Flash Oppo Joy R1001 – The Oppo Joy R1001 smartphone is an old and old-school smartphone. Naturally, if not a few of these Smartphone users experience problems such as total death (hard brick) or bootloop.
Table of Contents
How to Flash Oppo Joy R1001 [2023]
Of course, you can’t use a Smartphone for your various needs.
To solve this problem, there are two options that you can try. First, you can use the SP Flash Tool Software.
Also, read related article:
- How to Root Samsung Galaxy A50 Without PC (100% Working)
- How to Root and Install TWRP Recovery on Redmi GO
- How to Root Samsung Galaxy A40 (100% Working)
Second, you can do Flashing without a PC / Laptop, namely by using an SD card.
Flashing is a process that will erase all data on your Smartphone. We recommend that you do a data backup first before flashing.
How to Flash Oppo Joy R1001 using SP Flash Tool
This first Flash method requires the help of a PC / Laptop to be able to run it, because here we use Flashtool Software.
Flash material for Oppo Joy R1001
- Download MTK USB Driver VCOM.rar.
- Download SP Flash Tool.
- Download Firmware Oppo Joy R1001.
If you have downloaded all of the above ingredients in their entirety, then you can follow the steps to Flash the Oppo Joy R1001 below:
- First, please extract all the files that have been downloaded earlier.
- Next, install the Oppo Joy R1001 Driver that you downloaded earlier.
- Run the SP Flashtool Software, once it opens, please click Download Agent at the top right and look for the MTK All in One folder, then click Open.
- Then click the Scatter-loading button, and load the Oppo Joy R1001 file that you downloaded.
- Then click the Download button to start the Oppo Joy R1001 Flash ROM process
- Next press the Oppo Joy R1001 volume UP button (volume Up is the BOOT Flash button for Oppo Joy R1001) and use the Oppo Joy R1001 USB cable to connect to a PC/Laptop.
- The Oppo Joy R1001 Flash process will run
- After Flash Oppo Joy R1001 is complete, then there will be a notification that says Download OK.
- After the Flashing Process has been completed, please turn on the Oppo Joy R1001 Smartphone.
- During the reboot process, it will take between 5-10 minutes. So, please just wait.
How to Flash Oppo Joy R1001 using SD Card
If the first method has not worked or you do not happen to have a computer or laptop, then you can use the second step, namely by flashing the Oppo Joy R1001 using an SD card.
The SD card that you need to prepare is at least 4 GB, if it is more than 4 GB of memory capacity of course it will be much better. Make sure your Smartphone battery is at least 50% to avoid the Smartphone dying in the middle of the Flashing Process.
The Oppo Joy R1001 Flash material uses an SD Card
- Prepare an SD Card that is still good.
- Download Firmware Oppo Joy R1001
If so, now you can follow how-to Flash Oppo Joy R1001 using the following SD Card:
- First, please extract the .rar Firmware file first.
- Then take the .zip format file in the firmware extracted folder.
- Then Copy and Paste the .zip Format File to the SD card that you have prepared.
- Insert the SD card into the Oppo R1001 Smartphone which will be flashed.
- Turn off your Smartphone, and enter Recovery Mode, by pressing the Power + Volume down button simultaneously.
- Then you can choose the language, just choose English.
- Before flashing the Oppo Joy R1001 using an SD card, you should first wipe the cache data.
- If so, then select the Install From Sd menu.
- Wait for the Flashing process to finish.
- If the process is complete, then select Reboot to restart your Oppo Joy R1001 Smartphone.
- During the reboot process, it will take between 5-10 minutes. So, please just wait.
Conclusion:
Above is an article that discusses how to Flash Oppo Joy R1001 on bootloop, hang, totally dead (hard brick) using the SP Flash Tool and using the Sd Card, hopefully, this article can help you.
